Shaker Type Dust Collectors

  • Shaker Type Dust Collector with Shaker Mechanism
  • Shaker Type Dust Collector with Manuel Shaker cleaning

Multiple Pocket Shaker Type Dust Collector

Designed for various air volume applications and solid particles filtration, the MAXIVIBE shaker dust collector is ideal for small to medium size shops and industries, training facilities or vocational schools. The narrow footprint of the MAXIVIBE unit means that it may be installed inside or outside of the facility without losing valuable floor space. The (95 à 99% @ 5-10 microns) efficiency filter pocket envelope allows clean air to be recycled back into the premises for maximum energy savings. The manual or motorized cleaning systems dislodge particles from the filter and are then stored in a variety of bins, drawers or drums. Safety features such as explosion releif vents, back draft dampers or spark detection and extinguishing systems for explosive or combustible dust are available. Small to medium size woodshops, arts and craft classes, composite shops are only a few of the applications that require some kind of high efficiency dust collector. The MAXIVIBE motorized shaker is a great solution to capture, transport and filter the airborne polluants. Capacities vary from 700 CFM to over 18,000 CFM. Available fans can sustain up to 15’’ of static pressure which is sometime required for high velocity with chips or pellets. The high efficiency multiple pocket filter envelope is cleaned automatically by a powerful 1 HP motor when the unit is shut down. The UL/CSA approved control panel is factory mounted on the unit. Dust storage systems are available in bin vent configuration, low profile dust storage drawers, high capacity drums and raised structure for containers. Reactive material collection may require explosion venting doors, abort or blow back dampers or spark detection systems.

Economical pocket type manual shaker dust collector

Based on the MAXIVIBE design, the MAXIPLY manual shaker dust collector is more economical since it does not need an enclosed cabinet and the cleaning system is performed by manually shaking the ­filter envelope.

The (95 to 99% @ 5-10 microns) efficiency filter pocket envelope allows clean air to be recycled back into the premises for maximum energy savings. Primarily developed for interior installation in small shops and vocational schools, its use is perfect for medium to large size pollutants such as sawdust, grinding, buffing or sanding of different metals, powders and compo­sites.

Air volume capacity can vary from 500 CFM to 5000 CFM. The satin interior ­coated filter helps to minimize dust caking on filter surface. The angled hopper ensures cons­tant sliding of pollutants into the dust storage drum. The support structure can be ­easily dismantled for relo­cation into another part of the facility using the unit or for a new installation in a room with limited size doorways.

The budget minded MAXIPLY manual dust collector is built to be installed inside and designed for small to medium size woodshops, arts and craft classes, composite shops, etc. Having the same high efficiency as the MAXIVIBE because it has the same filter, it needs limited footprint and can be relocated to another location since the filter frame can be dismantled and rebuilt in only a few hours.

The cleaning action is performed by the shaker handle allowing the dust to fall free from the glazed filter surface into the hopper and drum. The four open sides of the filter cabinet recycle clean air evenly, also saving money by not needing added expenses for a return air duct. Air volume varies from 1700 CFM to 5000 CFM. Maximum as per NFPA 664 (Article

  • 95 to 99% @ 1-5 microns efficiency pocket type filter
  • Modular for various air volume capacities
  • Automatic or manual cleaning shaker system
  • Rugged painted steel cabinet and structure
  • Powerful 1 H.P. motor for shaker mechanism
  • Low or high profile dust storage system
  • Dust inlet with abrasion resistant feature
  • Choice of interior or exterior installation
  • Minimal field assembly required
  • No extra cost for location selection of explosion
    relief vent

General description

Dust and particles are carried from source capture drops into the main duct connected to the MAXIVIBE unit. Larger particles fall by gravity into the hopper toward the dust storage drum or canister. Finer particles are vacuumed upward into the high efficiency multi pocket filter envelope. The sound insulated fan mounted on top of the unit recycles clean air into the premises if desired or permitted. When the unit is shut down, the electronic control panel activates the cleaning cycle by shaking the filter envelope creating upper oscillation instead of usual bottom filter shaking which may result in lesser efficient cleaning. Filter inspection may be carried by simply opening the access door when unit is shut down.